50TD biodiesel processing machine
Introduction of 50TD biodiesel processing machinelow-temperature-press (LP), high-temperature-press.
external processing, using teaseed as raw materials.
one can run Shandong Microwave Machinery Co.,Ltd.factory with Shandong Microwave Machinery Co.,Ltd. refining equipment.
one can sell 50TD biodiesel processing machine while pressing at the market.
Functions of 50TD biodiesel processing machine
(1) 50TD biodiesel processing machineRefining section: used to P-acid de-gumming, alkali refining de-acid and water rinsing.
(2) Teaseeds oil machineryDecoloring section: used to remove off pigments, bleaching oils and grease dehydrate.
(3) Teaseeds oil machineryDeodorizing section: to remove off the odor components in oil.
(4) Teaseeds oil machineryDewax: used to remove off the wax in the oil, in order to get the high quality oil.
(5) 50TD biodiesel processing machineHeattransfer oil stove: supply each device production needing heat energy, temperature reach above 280°C.
(6) Teaseeds oil machinerySteam generator: produce the needing steam for de-odoring and distillation.
(7) 50TD biodiesel processing machineVacuum pump: supply needing vacuum for dehydrate, de-color, de-odor. Vacuum degree can reach above 755mm Hg.
(8) Teaseeds oil machineryPress filter: filter clay, filter out clear oil.
(9) 50TD biodiesel processing machineAir compressor: blow dry bleached clay, blow empty the leftover oil in the press filter.
It contains the international advanced pre-processing section, esterification process and distillation process, and it meets the European Union Standards(Patent No.: ZL200920089138.8). The prodution steps are as follows:
1. Preprocessing section of bio-oil: when heated to 65-70°C, bio-oil is leached to remove impurities.
2. Drying section: bio-oil without impurities is dehydrated and dried.
3. First esterification reaction: adding bio-oil dehydrated to methanol including 3% sulfuric acid, first esterification reaction starts, and it will take 1.5—2.5 hours.
4. Second esterification reaction: this esterification reaction will take 9—12 hours.
5. Vacuum drying section: Second esterification reactants are dried with vacuum, removing moisture, reducing water content below 3%.
6. Distillation section: with vacuum state, second esterification reactants after vacuum drying section are heated to 220°C, biodiesel forms by steaming. Then cooling biodiesel to be liquid, the liquid biodiesel is just finished biodiesel.
7. Methanol fine-distillation: after biodiesel is isolated, the remaining methanol liquid is distilled to form methanol. Methanol cooled can be reused.
Bio-oil can be plant oil, animal oil or high acid-value waste oil.
Advantages: 1. stable process pefermance
2. simple operation
3. small investment of equipment
4. high conversion rate( up to 85%)
Pls offer the detailed processing capacity or biodiesel yield you require when inquiry.
Shandong Microwave Machinery Co.,Ltd.is a Teaseeds oil machinery factory specializing in the production of 50TD biodiesel processing machine, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Teaseeds oil machinerycustomers with design and services of 1-2000 tons 50TD biodiesel processing machine. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Teaseeds oil machineryover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Teaseeds oil machineryoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Teaseeds oil machineryequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.