1.Screening:Removing the chaff and broken rice in the rice bran, in case of they will influence the oil yield and the desolvent of wet meal in the next process. In the process of puffing section, the general requirement of impurity is less than 3%, and the requirement of crude fiber is about 8%.
2.Magnetic separation :Clearing the iron impurity which migLD be in the rice brain. Since in the process of puffing, the iron impurity will be harmful to the screw of extrusion machine, affect the puffing effect. As the rice brain particles are small and poor liquidity, the iron impurities are always be wiped off by the magnetic barrels installed in the feeding port.
3.Quenching and tempering :it is the process of preheating so that to improve the temperature of the rice bran before puffing. After quenching and tempering the temperature will be controlled at 65--75 °C, and the moisture will be controlled at 10 ~12%. Thus, on the one side, it can increase the output of the extrusion machine, and on the other side, it can improve the quality of the puffed rice bran.
4.Puffing: the rice bran is injecting high pressure steam and high temperature water through the extrusion machine, so that it can improve the temperature and moisture in the extrusion machine,and can also form the high pressure to process the rice bran. All these can make the the rice bran become porous columnar structure from the original pulverized state.All these effectively passivate the activity of various of enzyme in the rice bran, and destroy the fat layer structure, so that it will be easier for the oil yield.
5.Drying:The moisture of puffed material comes from the extrusion machine is too big and the temperature is too high for direct leaching, the must be experience to process of drying and coo-ling, thus the moisture will reach 7%--9%, and temperature will reach 50-55°C. After puffing, the rice brain are usually dried and cooled by plat dryer.
full continuous canola oil refining machine
Detailed specification of full continuous canola oil refining machine
Oil Refinery capacity can be supplied
1T, 2T, 3T, 5T, 10T, 15T, 20T, 30T, 50T, 60T, 80T, 100T, 120T, 150T, 180T, 200T, 250T, 300T/D and 500TPD etc. Our engineer will analyse and design the corresponding equipment list all as per your capacity and request .
Main process of full continuous canola oil refining machine
Crude oilÃ¢ÂÂfilterÃ¢ÂÂmixÃ¢ÂÂreactorÃ¢ÂÂmixÃ¢ÂÂreactorÃ¢ÂÂcentrifugal separationÃ¢ÂÂoil residue
Phosphoric acid hot waterÃ¢ÂÂmix Ã¢ÂÂ
degumming oilÃ¢ÂÂcoolerÃ¢ÂÂdryÃ¢ÂÂcentrifuge separationÃ¢ÂÂmixÃ¢ÂÂalkali liquor
Ã¢ÂÂ vacuum steam jet pumpÃ¢ÂÂsteam citric acid
bleaching earthÃ¢ÂÂmixÃ¢ÂÂdecoloringÃ¢ÂÂfilterÃ¢ÂÂdecoloring oilÃ¢ÂÂmixÃ¢ÂÂheat
full continuous canola oil refining machine
Technical flow chart of full continuous canola oil refining machine
1. Neutralizer ItÃ¢ÂÂs used for ridding off acid ,degumming .
2. Decolorizer ItÃ¢ÂÂs used for ridding off/reducing the color of the oil .
3.Deodorizer ItÃ¢ÂÂs used for ridding off odor of the oil .
4. Transfer oil furence ItÃ¢ÂÂs used supplying for the heats required to the line ,it could make the
temperature up to 280 degrees.
5. Air pressurer Blow to dry the Clay for decoloring .
6. Oil filter Clear the oil decolorized .
7. Steam producer Producing steaLD of high temperater for deodorizer .
8. Neutralizing , There is 2 methods according to adding different quantity alikali and different oil temperature .
9. One is weak alkali(10-16 Be) and high oil temperature (75 degrees),who is only used for weak colour and low
acidity; the other is low temperature(20 degrees orso ) and density alkali(20 Be orso),whose is used more .
10. Decolorizer Pump the oil netralized into decolorizer vessel , samely mixing to rise its temperature to
90 degrees, then mixing fr 30 mins,to reduce water to 0.1%
shipping of full continuous canola oil refining machine
Any other questions,pls contact me without hesitation.
Shandong Leader Mechanical Equipment Co., LTD believe that whatever the field is, quality has always been at the heart of the company’s performance. We treat quality and service as a way of life and hope to serve you in the LD possible manner on a long term and mutually beneficial basis. If you want to know more information about our sunflower oil plant or any other seed processing plant, please contact us in the following form. Our responsible, experienced sunflower oil processing technical team is always ready to serve and guide you at any time.
All the other oil seeds pre-treatment and oil refining equipment, lLD sheller, cleaning sieve, cooker, filter and others is available at Guangxin. If you want to know to start a vegetable oil pressing line with oil press machine, please contact us, we will offer you the LD plan.
Tel:+86 15953125015(also Whatsapp)
Shandong Leader Mechanical Equipment Co., LTD is your LD choice!