Shandong Leader Machinery Co.,ltd. the crude oil is output by the oil feed pump from the oil tank, and cottonseed oil manufacturing process next enters the crude oil heat exchanger to recover part of heat cottonseed oil manufacturing process after metering and then is heated to the required temperature by the heater. After that,cottonseed oil manufacturing process is mixed with the metered phosphoric acid or citric acid from phosphate tank in the gas mixture (M401), and Best selling palm kernel oil mill then enters the conditioning tank (R401) to make the non-hydratable phospholipids in oil change into the hydratable phospholipids. Add the alkali for neutralization, and Best selling palm kernel oil mill the alkali quantity and alkali solution concentration depend on the quality of the crude oil. Through the heater, the neutralized oil is heated to the temperature (90°C) suitable for centrifugal separation to remove the phospholipids, FFA and other impurities in the crude oil. Then the oil goes to the washing process. cottonseed oil manufacturing process there is still moisture in the oil from the wash separator, and the moisture will affect the stability of the oil. So the oil at 90°C should be sent to vacuum drier to remove the moistureProduct Description
Best selling palm kernel oil mill
palm kernel oil mill
Technological process introduction
1. palm kernel oil mill Mainprocess introduction
cleaning: In order to obtain high effective cleaning, ensure good work condition and production stability, high efficient Cleaning screen was used in the process to remove big and small impurity.
Destoning: Used to remove impurities such as the proportion of larger stones after cleaning.
Crushing: In order to ensure flaking effect, peanut is generally broken up uniformly 6~8 flakes and water distribute uniformly during softening, and flakes is thin and burliness.
Cooking: The purpose refers to steamed fried green body through moist, heating, steam embryo, embryo fry and other treatment, the process of becoming mature embryos.To increase the permeability of the cell wall , make the oil easy flow out.
2. palm kernel oil mill Oil press
Screw press is a continuous press equipment for the pressing of oilseeds, the machine's featuresare the onetime squeeze, low energy consumption, small footprint, and it is the ideal oil equipment.
palm kernel oil mill
|Screw speed||30-45r/min||30-40 r/min||30-40 r/min||28-40 r/min||28-40 r/min|
Shandong Leader Machinery Co.,ltd. there is still about 500ppm soap in the neutralized oil from the separator. To remove the remaining soap, cottonseed oil manufacturing process add into the oil about 5~8% hot water, with water temperature 3~5 °C higher than the oil generally. Best selling palm kernel oil mill To achieve more stable washing effect, add phosphoric acid or citric acid when washing. The re-mixed oil and water in the mixer is heated to 90-95°C by the heater, and Best selling palm kernel oil mill then enters the wash separator to separate the remaining soap and most water. The water with soap and oil enters into oil separator to separate out oil in the water. Further catch the oil outside, cottonseed oil manufacturing process and the waste water is discharged to the sewage treatment station.and then Shandong Leader Machinery Co.,ltd. the dehydrated oil goes to the decoloring process. Finally, pump out the dry oil by canned pump.
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
NOTE:We can specially design the machine according to your production's features.