In and out of the process generally with pre-pressing or direct leaching of oil cake, embryo. The equipment is a set of continuous Vegetable Oil Solvent Extraction equipment, the complete set of equipment from the leaching, wet cake baking dissolution, mixed oil treatment, solvent recovery of four components, mainly extractor, steam off, long tube evaporator, stacked Stripping tower, condenser and other equipment, and equipped with explosion-proof motor and workshop equipment connected to the pipeline and the required instruments, meters, valves and other pipeline accessories.
Shandong Leader LD Grain and Oil Machinery Co.,Ltd.
|The picture for coconut oil extract origin |
|The brief introduction for coconut oil extract origin|
* Extraction process
The pre-pressed cake or flake, firstly enter into the sealed scraper blade to avoid
the solvent gas escaping because of the section without screw blade in the sealed auger.
Material seeds enter into the box-chained loop type extractor counter-currenting with
the solvent, the grease is extracted.
Miscella condnesity increase from 2% to more than 25%.
Miscella discharged from extractor and into miscella filter, then the leached meal
in the miscella tank enter into evaporation system through the first evaporation
feed pump and finally drop-in DTDC out from wet meal drag conveyor.
Using the secondary steam desolventized from DTC desolventizer and produced by
steam-jet pump to heat and evaporate micella in the first long-tube evaporator.
Export temperature reaches to 58-62Â°c and condensity reaches to more than 65%.
Then, micella enters into the second long-tube evaporator in which the temperature
is heated to 105-110Â°c by indirect steam and the condensity reaches to more than 95%.
Then miscella enters into stripper in which residual solvent in oil will be removed,
the export temperature reaches to about 105Â°c and the general volatile of the
extracted crude oil is less than 0.30%.
Wet meals discharged from the bottom of extractor enter the top of DTDC and
land on the predesolventizing trayers where thery are heated by the indirect steam,
thus, some solvent in meal is evaporated and meal temperature is risen.
Predesolventized meals land on predesolventizing trayers where they use the second
steam in desolventizing trayers to predesolventize solvent from meal, then meals enter
desolventizing layers in which direct steam is injected.
Direct steam is sprayed into the meals through the bottom holes, and distill the
solvent from meal by using steam in order to remove all solvent.
Desolventized meals land on the following drying and cooling layer to dry and cool meals,
cooled meals land on meal scraper blade from automatic material controlling gate on the
bottom of cooling layer, and then they are entered into meal storehouse.
*Condensation recovery process
Extractor is equipped with a separate condenser, first and second evaporation share
one condenser. Low and high temperature of solvent gas both from first and second
evaporation enter into the condenser after its neutralization, which greatly reduces
the load of condenser and improves the efficiency of condensing.
Stripping and analyzing share one condenser, the non-condensable gases from extractor
and other condensers enter into the vent gas recovery system through the final condenser.
In the recycling system, the cold paraffin will absorb the solvent gas and the final
nonsolvent gas will be discharged through fire resistance valve.
Paraffin absorbed the solvent gas can be also called rich oil, after heating by oil-oil heat
exchanger and steam, the rich oil will enter into desorber for desorption,
and into condenser after changing solvent into gas,
the final cooled paraffin can be recycled.
|Technical Parameters for coconut oil extract origin|
|Steam consumption||200kg/ton oil|
|Electric consumption||28kwh/ton oil|
|Water(soften water)||150kg/ton oil|
|Phosphoric acid||2~3 kg/ ton oil|
|Alkali||acid valuex 1-3kg/ ton oil|
|Circulating water cooling water yield||150m3/h|
|Bleaching earth consumption||3-5kg/ ton oil|
|Waste bleaching earth oil content||â¤25~35%|
acid valuex 1.2 (chemical refining)
acid valuex 0.6 (physics refining )
|Bleaching losses||the quantity of bleaching earth x 0.25%|
|Deodorization loss consumption||â¤0.5%|
|Refining rate||1-refining consumption|
|Advantages for coconut oil extract origin|
* Absorbing the world's leading core extraction technoloLD, design and develop
a process which is efficient, economical and reliable. Adopting box-chained loop
type extractor can effectively achieve low residual oil, low solvent consumption
and low failure rate of equipment.
* Full automatic computer control system is adopted in extracting process,
adjust automatically and operate stably.
* Negative pressure technoloLD is adopted in condensate system.
* Stainless steel heat exchange tubes and multistage baffling make the condenser
have a high heat transfer effciency, also the water consumption is low.
If you are in the market for coconut oil extract origin,
please contact with Joanna ^ 6^
Mobile: 0086 13526828605 ( welcome to add my whatsapp and viber )
Shandong Leader Mechanical Equipment Co., LTD believe that whatever the field is, quality has always been at the heart of the companyâs performance. We treat quality and service as a way of life and hope to serve you in the LD possible manner on a long term and mutually beneficial basis. If you want to know more information about our sunflower oil plant or any other seed processing plant, please contact us in the following form. Our responsible, experienced sunflower oil processing technical team is always ready to serve and guide you at any time.
All the other oil seeds pre-treatment and oil refining equipment, lLD sheller, cleaning sieve, cooker, filter and others is available at Guangxin. If you want to know to start a vegetable oil pressing line with oil press machine, please contact us, we will offer you the LD plan.
Tel:+86 15953125015(also Whatsapp)
Shandong Leader Mechanical Equipment Co., LTD is your LD choice!